Guides, Manuals, Parts & Support

Assembling the Lower Handles

1. Insert the left and right lower handles into the slots of the mower housing. Push down the lower handles until the screw holes are aligned.
2. Secure the lower handles with the 2 screws provided.

Assembling the Upper Handle

1. Align the upper handle and lower handles and secure with the wing knobs and bolts.
There are two possible height positions. Choose the one most suitable to the operator’s height.
2. Before fitting the wing knob, check and ensure the cable guide is attached on the upper handle. If not, attach the cable guide on the upper handle as shown. Ensure the hole on the cable guide is aligned with the hole on the upper handle. Insert the bolt through the inside of the lower handle, cable guide and upper handle assembly. Secure the wing knob to the bolt as shown.
3. Secure the cable against the handle frame with the supplied cable clips.

Assembling the Grass Collection Bag

1. Check the collection bag before assembling to make sure there is no damage.
2. Insert the grass collection bag handle into the slots on the upper cover of grass collection bag. Ensure this securely 'clicks' into place.
3. Secure the metal support rods into the fixing position on either side of the grass collection base. Ensure the side clamping sleeves are properly fixed onto the metal support frame.
4. There is a hole in the bottom of the grass collection bag to hang it up if required.