Guides, Manuals, Parts & Support

1. Remove the pre-installed pre-filter, and fully fit the dust bag flange onto the inlet stub. Place the pre-filter back into the container.

NOTE: Ensure the bag and filter are always fitted before use.

3. Fit the power head back onto the collection tank by securing the two latches. Ensure the power head sits properly on the collection tank and is correctly sealed.
4. Attach the locking end of the hose into the suction port of the container and turn clockwise to tighten.
5. Choose the desired accessories and/or extension wands and push and twist onto the hose nozzle.

Cleaning the Pre-filter

1) Remove the pre-filter and clean by gently tapping or brushing dirt off. For optimal performance it is recommended to replace the old filter with a new filter regularly.
2) Rinse the pre-filter with clean water. Allow the filter to completely dry before re-installing. DO NOT install a pre-filter if damp, this may cause damage to the appliance.

Cleaning the Air Inlet Filer

1) Remove the air inlet filter from the securing tabs by using the pull tab.
2) To wash the air inlet filter, rinse with clean water. Allow the filter to completely dry before re-installing.
3) For optimal performance it is recommended to replace the old filter with a new filter regularly. NOTE: Make sure that the pre-filter and air inlet filter are completely dry before use.

Cleaning & Replacing HEPA Exhaust Filter

1) Unlock the exhaust filter cover by lifting both of locking tabs upwards to release. Pull the door out.
2) Remove the exhaust filter from the vacuum cleaner and clean by gently tapping off any lose debris. For optimal performance it is recommended to replace the old filter with a new filter regularly. Rinse the exhaust filter with clean water. Pay attention not to rub or brush the filter while cleaning. Allow the exhaust filter to completely dry before re-installing.
3) Install the cleaned or new filter. Then insert the filter cover tabs into the upper slots and lock the filter door into place. You will hear a click if the filter door installed correctly.